Finn Moto Original Protective Motorcycle Hoodie
Kevlar Blend Outer Shell + Full Kevlar Lined
A protective motorcycle hoodie built for riders who want proper protection without wearing a bulky traditional motorcycle jacket.
The outer shell uses a black cotton/Kevlar® blended fleece and is fully lined with our proven 340gsm terry loop knitted DuPont™ Kevlar® liner — the same protective liner used in our 5 star MotoCAP rated Finn Moto 881 Motorcycle Jeans.
Using the EN13595:2002 abrasion test method (the same method used by MotoCAP), this hoodie achieved 5+ seconds abrasion resistance. Development testing of this material combination has shown even higher results.
OP Hoodie was independently tested by MotoCAP and achieved a 4-star rating.
For perspective, many casual motorcycle hoodies tested by MotoCAP sit closer to 0.5–2 seconds, while our previous model hoodie using a standard cotton fleece outer and 300gsm Kevlar® liner achieved around 3.5 seconds.
This updated version offers increased abrasion resistance, a stronger outer shell and improved long-term durability.
It also includes removable CE Level 2 armour in the shoulders, elbows and spine.
The fit is slightly longer through the torso for better coverage in a riding position while still feeling comfortable off the bike.
Key Features
- Protective cotton/Kevlar® blended fleece outer shell
- Full 340gsm DuPont™ Kevlar® terry loop liner
- Same protective liner used in our 5 star Finn Moto 881 Motorcycle Jeans
- 5+ seconds abrasion resistance (EN13595:2002 test method)
- Development testing has shown even higher results
- OP Hoodie achieved a 4-star MotoCAP rating
- Fully lined body and arms (excluding hood, cuffs and waistband)
- Removable CE Level 2 armour (shoulders, elbows and spine)
- Longer spine armour fitted to XL–3XL sizes
- Airmax mesh comfort lining
- YKK #8 zipper
- Two internal zip pockets
- Front hoodie pocket
- Bonded nylon safety stitching
- Longer torso cut for riding comfort
- Secure elastic cuffs and waistband
- True sizing — please check size chart
Previous hoodie info: (this will be updated to reflect the new jacket when it arrives, The correct specification is listed above;
Finnmoto's knitted protective layer of Dupont™ Kevlar® aramid fibre has been independently abrasion tested; passing level 2 in impact areas & level 1 in single layer areas for 13595-1: 2002 5.4 abrasion protection from Satra Technologies UK.
Sizing Guide - Simplified
|
SIZE |
XS |
S |
M |
L |
XL |
2XL |
3XL |
4XL |
5XL |
6XL |
7XL |
8XL |
9XL |
10XL |
||||||
|
Your actual measurements: (Inches) |
||||||||||||||||||||
|
Chest |
36 |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
54 |
58 |
62 |
66 |
70 |
||||||
|
Jackets actual outside measurements: |
||||||||||||||||||||
|
Armpit to Armpit |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
30 |
32 |
34 |
36 |
38 |
40 |
||||||
|
Back Length |
27 |
27.5 |
28 |
28.5 |
29 |
29.5 |
30 |
30.5 |
31 |
31.5 |
32.5 |
33.5 |
34.5 |
35.5 |
||||||
|
Arm Length |
26 |
26.5 |
27 |
27.5 |
28 |
28.5 |
29 |
29.5 |
30 |
30.5 |
31 |
31 |
31.5 |
31.5 |
||||||
|
Shoulders |
18 |
18.5 |
19 |
20 |
21 |
21.5 |
22 |
22.5 |
23 |
23.5 |
24 |
24.5 |
25 |
25.5 |
||||||
To ensure the jacket fits you perfectly we recommend measuring your actual chest and match it up with the above. (measurements are in inch's)
Dont have a dress tape measure? (use rope or power cord then measure point to point)
Fitting for XS to XL, if your Tshirt size is Large. Your chest should measure 42inch.
To double check how the large jacket will fit can grab a fitted yet comfortable jacket and measure across the chest under arm sleeves, it should be 24inch
Fitting for 2xl or higher, please measure your chest and match it up.
If your stomach is equal or larger than your chest measurement its best to go up one size.
For example Chest 50inch, Stomach 50inch you will be size 5xl
Tall customers:
The jacket is cut quite long in the torso for good coverage, if slim and tall you may get away with your true size
If you have an avg to large build and tall, its best to go up one size for length & broadness.
If your having problems working it out please email or call us, sales@finnmoto.com.au - 0405 247 408
1 Review Hide Reviews Show Reviews
-
Excellent
I usually don't leave reviews - but thought I would given the relative newness. This is an excellent quality hoodie, that is comfortable, and looks just like any other hoodie - perhaps except when looking closely at the back where the outline of the back protector is visible. The cotton is soft. Sizing: true to size. It's not a relaxed fit, but it's good. Pros: comfortable. Armour is surprisingly not that intrusive, you don't really notice it. Overall product feels very high quality. Cons: minor things I noted are: - The zipper doesn't have a 'pull' on it, which can make it difficult to operate when using motorcycle gloves - the cuffs come very tight - but after wearing it for 5 times or so it is getting more loose. - as would be expected, it is very heavy.
