New Model 881 Protective: Lighter, Stronger, Better and Rated number 1 on MotoCAP!
New order has arrived, sizes are instock. Orders are posted out in the order they are received, secure yours today!
Inventory:
30 leg - 28 30 32 34 36 38 40 42
32 leg - 28 30 32 34 36 38 40 42 44
34 leg - 30 32 34 36 38 40 42
36 Leg - 34 36 (Select the long leg 34inch, in order notes mention 36 leg)
Sizes instock USA: (42x30 - Free postage this item only contact us)
Sizes instock Canada: 40x34
Size guide - How to measure
*Notes: Images shown are for display purposes, when new batch arrives images will be updated.
FAQ:
- Do you exchange? Yes, Finn Moto pays for postage to send a new size out. You'll pay for postage to return after everything fits.
- This is the tested raw blue 881 jean on moto cap, position number 1 (5 star rated).
Introducing our new "881 Protective" - Raw Blue Protective Denim Motorcycle Jeans with additional full lined 100% genuine terry loop knitted Dupont™ KEVLAR® fiber. The combination of aramid blended single layer denim plus fully lined from waist to ankle, front & back with >350gsm protective liner which passed Satra UK level 2 en13595;2002 abrasion test lasting >7 seconds and now rated 5 stars on the Motocap website. These premium protective jeans are now the same thickness and weight as the level 1, providing you comfort all season with its airmax mesh lining. They keep you warm in the colder season & nights and cool during summer.
CE level 2 armour is included at knees and hips. The knee armour (<15kn) pocket allows two heights and the hip armour (<16kn) pocket is fixed position so it doesn't float around. Its recommended to wear the hip armour, the pants have been made to accommodate the hip armour without effecting the fit when standing or sitting on the bike. The new hip armour is comfortable, taking up minimal room whilst still performing at or below <16kn which keeps up with other high end armours. The jeans fit comfortable with the armour installed in motorcycle seat position.
Many customers comment how breathable the pants are when riding. eg "30°C in QLD, feels like 40°C were surprisingly breathable and comfortable to wear whilst riding on fast roads". Romania 40°C days, "whilst riding the Kevlar lining acted like insulation and could feel the airflow. January 2026 Australia tour down under SA Ambulance "The pants performed brilliantly! I rode in 43°C and today with high humidity, they are very comfortable."
The original version was standard denim & >550gsm protective liner, the problem was it was on the thicker and heavier side, which was great for customers in colder climates, but not so good when off the bike walking around. To achieve the same great protection the new 881 has been made with a stronger outer material and fully lined with a robust well balanced weight, proven protective liner, with armour included at hips and knees. Motocaps December 2024 test results of 5 stars is the current model.
The pants have been made to our strict standard for performance, comfort & looks. Only the highest quality materials & stitchers are used.
International Customers:
- USA: Prices shown include prepaid tariffs/duties for a fast, smooth import process. Freight is charged at cost, from approx. USD $32.
- Rest of world: Discounted international freight applies (approx. NZ $26 / CA $42).
- UK/Europe: This product is currently unavailable while we complete PPE compliance.
FEATURES:
* Reinforced outer layer stretch Denim w/ aramid blend
* Reinforced with fully lined with 100% Genuine Terry-Loop Knitted Yellow 340gsm Dupont™ KEVLAR® fiber
* UK Satra abrasion tested (Cambridge machine), lasts >7 seconds which meets level 2 abrasion.
* Motocap Australia results are 9.31 seconds, 5/5 Stars with 77.4 score (highest rating on motocap for jeans)
* Knitted to allow breath-ability
* Fully lined front & back from waist to ankle
* Good weight protective layer works well in hot and cold season
* Airmax mesh all season comfort lined front and back
* Smooth, high quality YKK zipper fly w/brass loop
* Removable CE2 Approved memory armour included for knees and hips (approx 15KN)
* Armour pockets can fit alternative armour brands such as the D30 ghost knee and hip armour. (purchased elsewhere)
* 6 belt loops
* Double & triple stitching throughout pants; inside, outside, back rise
* 3ply & 5ply bonded nylon thread
* 5 open pocket jean style
Armour EN1621 Details:
* UKCA certified
* Knees rated at EN1621-1:2012 Type A, Level 2
* Hips rated at EN1621-1:2012 Type B Level 2.
CE EN 17092:
Currently unavailable to UK/Europe while we complete PPE compliance. The 881 is undergoing EN 17092-2:2020 AAA assessment, with testing complete and examination underway.
These protective motorcycle jeans easily look like a normal pair of raw blue jeans, achieving a casual look. No odd outer seems so they look normal on & off the bike. Straight out of the packet these jeans have a soft touch, so you can slide into a comfortable fit.
The following aftermarket armours fit our jeans without any pocket modification
- Alpinestars Flex Pro knee armor (level 2, T+/T-) (fills the whole pocket)
- D30 ghost, D30 Diablo level 2 (knee and hip armour)
- Knox Lvl 2 elbow/knee armour Part 454
Finnmoto independently tests the protective lining & denim used in its jeans. The impact abrasion test meets level 2 protection throughout the protective denim and 340gsm lined jeans for 13595-1: 2002 5.4 abrasion protection from Satra Technologies UK. (>7 seconds of abrasion = level 2) and has recently achieved 9.31 seconds from Motocap Australia, achieving the highest star rating 5/5. ref: https://motocap.com.au/product/881-protective
Latest test rating promoting "AAA" only requires material that lasts 2.5 seconds on the Cambridge machine. Australian roads are rougher and mostly chip seal its recommended you wear jeans closer to 4 seconds.
Motocap explanation: The Darmstadt impact abrasion test machine is designed to simulate garments sliding across an asphalt surface, whereas the Cambridge machine simulates rougher surfaces. The Darmstadt machine replicates the European road network that is predominantly smooth asphalt. Whilst most urban areas in larger cities and towns in Australia and New Zealand do have asphalt surfaces, almost all rural roads are chip seal. Chip seal roads are four and a half times more abrasive than asphalt. Recent on-road trials in Australia and New Zealand have confirmed that testing on the Cambridge machine accurately simulates sliding on chip seal road surfaces. These trials have validated the Cambridge impact abrasion test as the more appropriate method for Australian and New Zealand motorcycle clothing, and addresses the most challenging road surface clothing might encounter, as well as less abrasive city streets; hence why it is used by MotoCAP. ref https://www.motocap.com.au/frequently-asked-questions
DuPont™ and Kevlar® are trademarks of affiliates of DuPont De Nemours, Inc.
The actual measurements listed in the size chart below are in (INCH'S), recommended to use dress tape measure.
'Jean size' refers to the label size; true Australian jean size.
You can cross reference by measuring the circumference of your bodies waist line, match it upto 'recommended waist circumference'.
To triple check you can grab your existing good fitting jeans, lay them flat & measure across top waist as in picture below.
The sizing guide is our average leg cut / 32inch (fits approx height 170cm to 185m).
Short leg is 2inch shorter / 30inch (<170cm).
Long leg is 2inch longer / 34inch. (>185cm)
When comparing the inner leg its important you sit on the bike and gauge the length needed to cover ankle. Take note of the difference.
Measure from crotch seam, follow down to the ankle seam and apply the difference.
|
JEAN SIZE |
28 |
30 |
32 |
33 |
34 |
35 |
36 |
38 |
|
Recommended Waist (circumference inch's) |
30" |
32" |
34" |
35" |
36" |
37" |
38" |
40" |
|
Across Waist |
14" |
15" |
16" |
16.5" |
17" |
17.5" |
18" |
19" |
|
Outer Leg |
40.5" |
41.5" |
41.5" |
41.5" |
42" |
42" |
42.5" |
42.5" |
|
Inner Leg |
32" |
32" |
32" |
32" |
32" |
32" |
32" |
32" |
|
JEAN SIZE |
38 |
40 |
42 |
44 |
-- |
SHORT |
AVERAGE |
LONG |
|
Recommended Waist (circumference inch's) |
40" |
42" |
44" |
46" |
|
|
|
|
|
Across Waist |
19" |
20" |
21" |
22" |
|
|
|
|
|
Outer Leg |
42.5" |
43" |
43.5" |
44" |
|
|
|
|
|
Inner Leg |
32" |
32" |
32" |
32" |
|
30" |
32" |
34" |
<picture>
17inch across the top waist will be a size 34. Inner leg 32inch will be average leg.
To cross reference lay your normal jeans flat, measure cross the waist side to side equals 17inch.
Remember our jeans have Kevlar, your normal 34 jeans might measure a little less and have more stretch.
(Your welcome to email through your measurements before purchasing to help with size selection).
|
Actual body measurements (standing):
Grab good fitting jeans that are good when standing and sitting on the bike:
Lay jeans flat and measure:
|
67 Reviews Hide Reviews Show Reviews
-
great jeans really comfortable
Absolutely love these jeans. They’re super comfortable, feel seriously heavy-duty, and the quality is excellent. With a 5-star MotoCAP safety rating, they’re also among the safest motorcycle jeans you can buy, which gives me a lot more confidence when riding. The Finn Moto 881s have definitely won me over. Comfortable, tough, and highly rated for protection — they’re the only riding jeans I’ll be buying from now on. Highly recommended.
-
881 jeans
10 sec abrasion rating per Motocap, better than EU AAA rating
-
Very Happy
While I happily can't rate the protective qualities of these 881's, MOTOCap's test report gives me confidence. What I can say is that customer support has been very good, the fit is right on, comfort is good and they seem to be well made. Assuming MOTOCap's testing is legit, these jeans will make you rethink your protective riding gear strategy.
-
881 Lvl 2 bike jeans
A great experience all round dealing with FinnMoto. Matt was thorough and professional, only took a short time to get the product and the price was fair. I’ll definitely shop with them again.
-
Phenominal Service and product
Was sent the recommended size, and it was a little too loose. Matt then sent me a few more pairs to try, and I ended up withthe perfect set. Talk about superb customer service. High quality set of riding pants as you would expect, but above and beyond for service. Very happy!
-
HUGE FAN
These arrived with exactly the right fit. Not a single thread out of place. Great quality and much better than anything I have purchased before.
-
Blue Protective Denim Motorcycle Jeans - 881 / Lvl2
Excellent fit, appearance and comfort. Have ridden using these jeans in temperatures of 35-40c. They were warm but not uncomfortable. Normally a 38 in waist but Matt recommended a size 36 due to my otherwise slim build, and he was correct. They feel robust yet highly practical for everyday wear on the bike . Top marks for the product and customer service.
-
Great value great fitting
Very happy, jeans fit well and appear great quality thank you
-
Top-tier
You will NOT find better and safer riding jeans than these. A lot claim to be the highest quality but these are the real deal and have set the bar for me. Don't accept less than these, your safety is everything and these are as good as they get.
-
881 Jeans
Very comfortable jeans that fit perfectly. Finn Moto took the time to gather exact measurements to ensure a good fit and their efforts were well worth it. Jeans look good fit good and have a 5 star MotoCap rating. Worth every penny. Buy them!
-
881 jeans
Excellent fit. They took the time to confirm exact measurements after the sale but before selection and shipping. Very professional and of course an excellent motocap rating!
-
881 jeans
Excellent rating with motogap.com, very comfortable and appear very well made.