null Skip to main content

Blue Protective Denim Motorcycle Jeans - 881 / Lvl2 (Preorder)

$328.00
(8 reviews) Write a Review
SKU:
881-raw
Adding to cart… The item has been added

New Model 881 Protective: Lighter, Stronger, Better and Rated number 1 on MotoCAP!

Introducing our new "881 Protective" - Raw Blue Protective Denim Motorcycle Jeans with additional full lined 100% genuine terry loop knitted Dupont KEVLAR® fiber. The combination of aramid blended single layer denim plus fully lined from waist to ankle, front & back with 340gsm protective liner which passed Satra UK level 2 en13595;2002 abrasion test lasting >7 seconds and now rated 5 stars on the Motocap website. These premium protective jeans are now the same thickness and weight as the level 1, providing you comfort all season with its airmax mesh lining. They keep you warm in the colder season & nights and cool during summer.

CE level 2 armour is included at knees and hips. The knee armour pocket allows two heights and the hip armour pocket is fixed position so it doesn't float around. Its recommended to wear the hip armour but we understand for some it changes the fit, if you are a larger build in the hip/bottom area and want hip armour its recommended to go up one size, if you plan to not fit hip armour you can choose your normal size. For average and slim builds the pants should still fit good with hip armour in. 

The previous version was standard denim & 500gsm protective liner, the problem was it was on the thicker and heavier side, which was great for customers in colder climates, but not so good when off the bike walking around. To achieve the same great protection we've made the outer material stronger and lined it with a robust well balanced weight protective liner.

The pants have been made to our strict standard for performance, comfort & looks. Only the highest quality materials & stitchers are used.

New order is currently being made, eta announced shortly. Current estimate arrival is June 2025. Preorder today to secure your pair.

Sizes currently instock:
Short: 36
Long 32 40

* Reinforced with single layer stretch Denim w/ aramid blend
* Fully lined with 100% Genuine Terry-Loop Knitted Yellow 340gsm Dupont KEVLAR® fiber
* UK Satra abrasion tested (Cambridge machine), lasts >7 seconds which meets level 2 abrasion.
* Motocap Australia results are 9.31 seconds, 5/5 Stars with 77.4 score
* Knitted to allow breath-ability
* Fully lined front & back from waist to ankle
* Thicker protective layer doubles as insulation for colder season
* Airmax mesh all season comfort lined front and back
* Smooth, high quality YKK zipper fly w/brass loop
* Removable CE2 Approved memory armour included for knees and hips  (approx 15KN)
* 5 belt loops
* Double & triple stitching throughout pants; inside, outside, back rise
* 3ply & 5ply bonded nylon thread
* 5 open pocket jean style


These protective motorcycle jeans easily look like a normal pair of raw blue jeans, achieving a casual look. No odd outer seems so they look normal on & off the bike. Straight out of the packet these jeans have a soft touch, so you can slide into a comfortable fit.

Finnmoto independently tests the protective lining & denim used in its jeans. The impact abrasion test meets level 2 protection throughout the protective denim and 340gsm lined jeans for 13595-1: 2002 5.4 abrasion protection from Satra Technologies UK. (>7 seconds of abrasion = level 2) and has recently achieved 9.31 seconds from Motocap Australia, achieving the highest star rating 5/5. ref: https://motocap.com.au/product/881-protective

Latest test rating promoting "AAA" only requires material that lasts 2.5 seconds on the Cambridge machine. Australian roads are rougher and mostly chip seal its recommended you wear jeans closer to 4 seconds.

Motocap explanation: The Darmstadt impact abrasion test machine is designed to simulate garments sliding across an asphalt surface, whereas the Cambridge machine simulates rougher surfaces. The Darmstadt machine replicates the European road network that is predominantly smooth asphalt. Whilst most urban areas in larger cities and towns in Australia and New Zealand do have asphalt surfaces, almost all rural roads are chip seal. Chip seal roads are four and a half times more abrasive than asphalt. Recent on-road trials in Australia and New Zealand have confirmed that testing on the Cambridge machine accurately simulates sliding on chip seal road surfaces. These trials have validated the Cambridge impact abrasion test as the more appropriate method for Australian and New Zealand motorcycle clothing, and addresses the most challenging road surface clothing might encounter, as well as less abrasive city streets; hence why it is used by MotoCAP. ref https://www.motocap.com.au/frequently-asked-questions

DuPont™ and Kevlar® are trademarks of affiliates of DuPont De Nemours, Inc.

 

The actual measurements listed in the size chart below are in (INCH'S), recommended to use dress tape measure.

'Jean size' refers to the label size; true Australian jean size.
You can cross reference by measuring the circumference of your bodies waist line, match it upto 'recommended waist circumference'.
To triple check you can grab your existing good fitting jeans, lay them flat & measure across the waist as in picture below. 

The sizing guide is our average leg cut (fits approx height 170cm to 185m). Short leg is approx 2inch shorter (<170cm). Long leg is approx 2inch longer. (>185cm)

JEAN SIZE

28

30

32

33

34

35

36

38

Recommended Waist (circumference inch's)

30"

32"

34"

35"

36"

37"

38"

40"

Across Waist

14.5"

15.5"

16.5"

17"

17.5"

18"

18.5"

19"

Outer Leg

40.5"

41.5"

41.5"

41.5"

42"

42"

42.5"

42.5"

Inner Leg

31.5"

32"

32.5"

32.5"

33"

33"

33.5"

33.5"

 

JEAN SIZE

38

40

42

44

46

48

50

52

Recommended Waist (circumference inch's)

40"

42"

44"

46"

48"

50"

52"

54"

Across Waist

19"

20"

21"

22"

23"

24"

25"

26"

Outer Leg

42.5"

43"

43.5"

44"

44.5"

45"

45.5"

46"

Inner Leg

33.5"

33.5"

33.5"

34"

34"

34"

34"

34"

jeans.howtomeasure1.jpg
17.5inch across the waist will be a size 34.
 
If you normally wear a standard size 34 in Australia, you will fit in our size 34.
Measuring your bodies belt line it should measure 36inch waist circumference. To cross reference lay your normal jeans flat, measure cross the waist side to side equals 17.5inch. Remember our jeans have kevlar so if your normal 34 jeans might measure a little less.
 
USA: If you wear a size 34 in USA clothing, then you should choose 35 or 36 (use the circumference and across waist method).
 
If you need help with size selection please call or email with the following information:

- Normal jean size?
- Height?
- Actual waist circumference or across waist measurement of jeans?

8 Reviews Hide Reviews Show Reviews

  • 5
    881

    Posted by James on 22nd Mar 2025

    Excellent fit and very comfortable even at over 30 degrees. Nice to know they offer greater protection than most leathers.

  • 5
    340GSM/LVL2

    Posted by Steve on 29th Apr 2024

    I’ve tried a few protective jeans over the years but the quality of these is second to none. The fit and feeling of security they provide is excellent. A true quality product great job Finn Moto.

  • 5
    New generation 340 gsm Jeans

    Posted by Mark on 1st Mar 2023

    Love the jeans, but not a big fan of the new clour would love to see the old raw blue ( levei colour) return like my old 500gsm jeans.

  • 5
    Raw Blue 500 GSM

    Posted by Simon on 25th Oct 2019

    I made the decision to go with Finn after a fair bit of research and liked the armour being included and full Kevlar from top to bottom, I added hip armour that you would struggle to even tell you were wearing it and liked the security of the 500 grams. The jeans look and feel great my wife couldn’t tell they were even riding jeans. I ordered my standard jeans size and then received an email directly from Matt informing me he was having trouble finding the size in stock, he gave me a number of options while still trying to locate the original ordered pants, we discussed measurements via email as I’m a size 33 and next thing the perfect size pants arrived. Its great getting this kind of service that is now very rare. Especially compared to other online manufactures that simply come up as out of stock and that’s the end of the process. I'm not a big fan of ordering clothes on-line but in Finns case it was seamless transaction with a perfect result. The other positive reviews here also made me confident in buying online and anyone reading this I can absolutely say the service and quality of the gear is as good, actually better than I could find online or in stores. Thanks Matts keep up the great work delivery Aussie quality and service to the world. Regards Simon G

  • 5
    500g bike jeans

    Posted by Alan on 10th Aug 2019

    Good fit, look great and feel very safe Very well made 100% satisfied This is my second pair and both my sons wear Finn moto jeans Great products

  • 5
    Great product

    Posted by Andy on 17th Dec 2018

    True fit to size , really comfortable to wear and not to hot to wear all day

  • 5
    Perfect Jeans

    Posted by Bob on 6th Aug 2018

    Purchased these jeans couple weeks ago, took them on a long 4 hour ride yesterday and found them very comfortable and warm also using the knee and hip protectors. looking at this product offers plenty of protection in case and quality is very good, I would recommend these jeans.

  • 5
    Perfect Jeans

    Posted by Eddie on 3rd Apr 2018

    Great jeans, very comfortable and warm. I feel there is more than enough protection if things go wrong. You won't be disappointed this is a quality product.