Black Motorcycle Jeans, fully lined 100% genuine DuPont™ KEVLAR® fiber. The protective lining is 340gsm terry loop knitted which provides a level 1 impact abrasion resistance, the pants are suitable for most of the year.
Premium pair of jeans dark black cotton denim outer with slight stretch along with a neat straight leg cut gives the rider a pair of stylish well protected pair of motorcycle jeans. Strictly made to a high standard, performance, comfort & looks. Only the highest quality materials & well experienced stitchers are used to create these pants.
This new version has gone harder to improve an existing well refined pair of motorcycle jeans sold for 10+ years and taken it to another level.
Some of the improvements you'll see are improved weight stretch denim, protective liner with more loops and density for more impact abrasion protection, stitched in hip armour pockets to hold in place with hidden velcro for comfort, two level adjustable knee armour position, protective liner stitched all the way to ankle for ease of putting on and off (no longer catching heel), an overall neater stylish cut without effecting the fit when sitting. Photos will be updated shortly.
Protection:
Finn Moto model 882 jean testing results of 4 seconds / level 1 en13595-1:2002 with the Cambridge testing machine.
As referenced by motocap Australia; Cambridge testing machine simulates garments sliding on chip seal road which is 4X more aggressive than smooth asphalt.
Chip seal is found in most rural roads and asphalt is mostly used in larger towns and cities in Australia. (Europe mostly uses asphalt all over)
The new Europe A AA AAA rating system (Darmstadt abrasion test en 17092) is suitable for smooth asphalt.
To give you an idea of what the above means, material that can achieve AAA results, lasts 2 seconds on the Cambridge testing machine.
Fit: The pants will suit riders with a skinny to average frame looking for a neat straight leg cut. If you are a average to fuller build id recommend looking at the raw blue. Black fits inbetween the two.
Distressed blue = Straight leg (Neat/slim)
Black = Straight leg (average)
Raw Blue = Straight leg (little extra room)
Last of the 882 black available.
-Size 42, 44 Black instock
Preorder for out of stock sizes:
Model 882 distressed blue is currently being manufactured. (eta Late August / Early September)
To cover the wide range of sizes and ensure orders can be produced in a reasonable timeframe we've got the following options available. (Model 882 - Raw blue & black are not available at the moment)
Instock:
881 - blue (limited sizes)
881 - black (limited sizes)
Please see model 881, this order will be arriving first.
* New Reinforced with 100% Genuine Knitted Yellow 340gsm DuPont™ KEVLAR® fiber
* UK Satra abrasion tested, lasts 4 seconds which meets level 1 abrasion
* Knitted to allow breathability
* Fully lined front & back from waist to ankle
* Great to wear all season, light weight non bulky
* Airmax mesh comfort lined front and back
* Smooth, high quality YKK zipper fly w/brass loop
* New Removable CE2 Approved comfortable memory armour at knees
* Brass rivets at front pockets
* 5 belt loops
* Double & triple stitching throughout pants; inside, outside, back rise
* 3ply & 5ply bonded nylon thread
* 5 open pocket jean style
These black denim jeans give the appearance your wearing a normal pair of denim jeans. No outer seems so they look normal on & off the bike. Straight out of the packet these jeans are prewashed with a soft touch, so you can slide in them with ease and go for a ride immediately.
Finnmoto independently tests the protective lining & denim used in its jeans. The impact abrasion test meets level 1 protection throughout the jeans for 13595-1: 2002 5.4 abrasion protection from Satra Technologies UK. (4 seconds of abrasion = level 1). The fabric has also been tested in Australia achieving 3.8 seconds.
DuPont™ and Kevlar® are trademarks of affiliates of DuPont De Nemours, Inc.
The actual measurements listed in the size chart below are in (INCH'S), recommended to use dress tape measure.
'Jean size' refers to the label size; true Australian jean size.
You can cross reference by measuring the circumference of your bodies waist line, match it upto 'recommended waist circumference'.
To triple check you can grab your existing good fitting jeans, lay them flat & measure across the waist as in picture below.
The sizing guide is our average leg cut (fits approx height 170cm to 185m). Short leg is approx 2inch shorter (<170cm). Long leg is approx 2inch longer. (>185cm)
|
JEAN SIZE |
28 |
30 |
32 |
33 |
34 |
35 |
36 |
38 |
|
Recommended Waist (circumference inch's) |
30" |
32" |
34" |
35" |
36" |
37" |
38" |
40" |
|
Across Waist |
14.5" |
15.5" |
16.5" |
17" |
17.5" |
18" |
18.5" |
19" |
|
Outer Leg |
40.5" |
41.5" |
41.5" |
41.5" |
42" |
42" |
42.5" |
42.5" |
|
Inner Leg |
31.5" |
32" |
32.5" |
32.5" |
33" |
33" |
33.5" |
33.5" |
|
JEAN SIZE |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
|
Recommended Waist (circumference inch's) |
40" |
42" |
44" |
46" |
48" |
50" |
52" |
54" |
|
Across Waist |
19" |
20" |
21" |
22" |
23" |
24" |
25" |
26" |
|
Outer Leg |
42.5" |
43" |
43.5" |
44" |
44.5" |
45" |
45.5" |
46" |
|
Inner Leg |
33.5" |
33.5" |
33.5" |
34" |
34" |
34" |
34" |
34" |
17.5inch across the waist will be a size 34.
- Normal jean size?
- Height?
- Actual waist circumference or across waist measurement of jeans?
51 Reviews Hide Reviews Show Reviews
-
Good quality and fit. Haven't tested impact or abrasion protection!
There was a problem with the availability of what I ordered, and this caused a delay which was not apparent until several days later. From this point, however, I was dealt with very well. Matt contacted me and offered to send the 450gsm trousers instead. I have worn these twice and am very happy with the fit and quality. They are heavy - hot to walk around in in summer, but reassuring on the bike. I usually wear size 32 jeans and these fit true to size. They could be a little longer in the leg - I am 180cm and ordered the standard leg length. With the kneepads in, they sit a little above the ankle. If you are any taller than me, definitely get the longer ones. Recommended, and I'll happily shop with Finn moto again.
-
Fit like jeans, look great
I bought the Black Motorcycle Jeans - 300gsm Kevlar. I am a size 32 waist and 32 leg in Levis. I bought the Finn jeans in the 32 size and they fit well. I don't like scratchy labels inside clothing so I did remove the inner pockets that are designed to hold hip pads. I found that the velcro tabs in them had sharp edges and they also added bulk. The jeans came with knee protectors in them, which I also removed as I wanted a casual look. I have washed them once so far and they did not seem to shrink. They are quite heavy which is not surprising as you are wearing 3 pairs of pants - outer denim, then Kevlar, then a very light perforated synthetic fabric that keeps the Kevlar away from your skin and helps everything to move about as it should. A stout belt is necessary or they would be around your ankles. I am very happy with the jeans. They look casual. I have worn them all day at work with no problems, and they have total kevlar coverage.
-
Should've bought this earlier
Exceptional value for money: soft, strong, well finished, comfortable and good looking. A must have! My previous one was somewhat uncomfortable, more expensive and offered less protection, as it was not a full linen and lacked the knee armour. I ordered a size 40 based on my waist measure and they sent me a 38, after a phone contact, which was simply a perfect fit (the 40 would have been too big - thanks guys). So, a good price for good service with good quality! It's not the first time I buy things from them ('bought a bike to bike intercom some months ago) and I'll surely be a returning customer in the future.
-
Best fitting jeans I have
I opted for finn-moto motorcycle jeans because they have a long-leg option. I usually have a lot of trouble finding jeans that fit my waste but still have a full leg. These are the best fitting jeans I own now. The leg is narrow, but not enough to be restrictive. The pads are correctly positioned and aren't cumbersome - it's not immediately obvious to everybody else if I'm wearing the pads or not. Wouldn't buy anything else ;)
-
GREAT SERVICE
Goods arrived on time. Quality merchandise. And easy to get in touch with Matt who was only too willingly to answer my queries
-
Cool Looking Kevlar
Got these and Very Impressed with Quality and Fit and they feel strong also very comfortable why riding and walking about in these Jeans even with the Armour Fitted. I would recommend these to anyone
