Black Motorcycle Jeans, fully lined 100% genuine DuPont™ KEVLAR® fiber. The protective lining is 340gsm terry loop knitted which provides a level 1 impact abrasion resistance, the pants are suitable for most of the year.
Premium pair of jeans dark black cotton denim outer with slight stretch along with a neat straight leg cut gives the rider a pair of stylish well protected pair of motorcycle jeans. Strictly made to a high standard, performance, comfort & looks. Only the highest quality materials & well experienced stitchers are used to create these pants.
This new version has gone harder to improve an existing well refined pair of motorcycle jeans sold for 10+ years and taken it to another level.
Some of the improvements you'll see are improved weight stretch denim, protective liner with more loops and density for more impact abrasion protection, stitched in hip armour pockets to hold in place with hidden velcro for comfort, two level adjustable knee armour position, protective liner stitched all the way to ankle for ease of putting on and off (no longer catching heel), an overall neater stylish cut without effecting the fit when sitting. Photos will be updated shortly.
Protection:
Finn Moto model 882 jean testing results of 4 seconds / level 1 en13595-1:2002 with the Cambridge testing machine.
As referenced by motocap Australia; Cambridge testing machine simulates garments sliding on chip seal road which is 4X more aggressive than smooth asphalt.
Chip seal is found in most rural roads and asphalt is mostly used in larger towns and cities in Australia. (Europe mostly uses asphalt all over)
The new Europe A AA AAA rating system (Darmstadt abrasion test en 17092) is suitable for smooth asphalt.
To give you an idea of what the above means, material that can achieve AAA results, lasts 2 seconds on the Cambridge testing machine.
Fit: The pants will suit riders with a skinny to average frame looking for a neat straight leg cut. If you are a average to fuller build id recommend looking at the raw blue. Black fits inbetween the two.
Distressed blue = Straight leg (Neat/slim)
Black = Straight leg (average)
Raw Blue = Straight leg (little extra room)
Last of the 882 black available.
-Size 42, 44 Black instock
Preorder for out of stock sizes:
Model 882 distressed blue is currently being manufactured. (eta Late August / Early September)
To cover the wide range of sizes and ensure orders can be produced in a reasonable timeframe we've got the following options available. (Model 882 - Raw blue & black are not available at the moment)
Instock:
881 - blue (limited sizes)
881 - black (limited sizes)
Please see model 881, this order will be arriving first.
* New Reinforced with 100% Genuine Knitted Yellow 340gsm DuPont™ KEVLAR® fiber
* UK Satra abrasion tested, lasts 4 seconds which meets level 1 abrasion
* Knitted to allow breathability
* Fully lined front & back from waist to ankle
* Great to wear all season, light weight non bulky
* Airmax mesh comfort lined front and back
* Smooth, high quality YKK zipper fly w/brass loop
* New Removable CE2 Approved comfortable memory armour at knees
* Brass rivets at front pockets
* 5 belt loops
* Double & triple stitching throughout pants; inside, outside, back rise
* 3ply & 5ply bonded nylon thread
* 5 open pocket jean style
These black denim jeans give the appearance your wearing a normal pair of denim jeans. No outer seems so they look normal on & off the bike. Straight out of the packet these jeans are prewashed with a soft touch, so you can slide in them with ease and go for a ride immediately.
Finnmoto independently tests the protective lining & denim used in its jeans. The impact abrasion test meets level 1 protection throughout the jeans for 13595-1: 2002 5.4 abrasion protection from Satra Technologies UK. (4 seconds of abrasion = level 1). The fabric has also been tested in Australia achieving 3.8 seconds.
DuPont™ and Kevlar® are trademarks of affiliates of DuPont De Nemours, Inc.
The actual measurements listed in the size chart below are in (INCH'S), recommended to use dress tape measure.
'Jean size' refers to the label size; true Australian jean size.
You can cross reference by measuring the circumference of your bodies waist line, match it upto 'recommended waist circumference'.
To triple check you can grab your existing good fitting jeans, lay them flat & measure across the waist as in picture below.
The sizing guide is our average leg cut (fits approx height 170cm to 185m). Short leg is approx 2inch shorter (<170cm). Long leg is approx 2inch longer. (>185cm)
|
JEAN SIZE |
28 |
30 |
32 |
33 |
34 |
35 |
36 |
38 |
|
Recommended Waist (circumference inch's) |
30" |
32" |
34" |
35" |
36" |
37" |
38" |
40" |
|
Across Waist |
14.5" |
15.5" |
16.5" |
17" |
17.5" |
18" |
18.5" |
19" |
|
Outer Leg |
40.5" |
41.5" |
41.5" |
41.5" |
42" |
42" |
42.5" |
42.5" |
|
Inner Leg |
31.5" |
32" |
32.5" |
32.5" |
33" |
33" |
33.5" |
33.5" |
|
JEAN SIZE |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
|
Recommended Waist (circumference inch's) |
40" |
42" |
44" |
46" |
48" |
50" |
52" |
54" |
|
Across Waist |
19" |
20" |
21" |
22" |
23" |
24" |
25" |
26" |
|
Outer Leg |
42.5" |
43" |
43.5" |
44" |
44.5" |
45" |
45.5" |
46" |
|
Inner Leg |
33.5" |
33.5" |
33.5" |
34" |
34" |
34" |
34" |
34" |
17.5inch across the waist will be a size 34.
- Normal jean size?
- Height?
- Actual waist circumference or across waist measurement of jeans?
51 Reviews Hide Reviews Show Reviews
-
Mens black kevlar 300gsm jeans
Very comfortable, well made jeans.
-
Fits well
Nice quality. Fits well and pads are located where they should be. Fast delivery, too!
-
Comfortable
Great fit, comfy. I’m 6’3 so got the long leg and they cover to my ankles well when in ridding position. Removable knee and hip pads go in and out easily.
-
Black Motorcycle Jeans
Best made Kevlar jeans available IMO. Fully lined with Kevlar unlike most on the market. Would definitely recommend.
-
Jeans
Best fitting jeans for riding i own
-
Black 300grm jeans
Best jeans. Fully lined so real easy to get on and off. This is my third pair, I live in the tropical north of QLD and these are great. Get lots of comments on them too. If I were to nit pick, I'd like slightly bigger front pocket openings, but other than that, best riding jeans out there.
-
Black Motorcycle Jeans
Excellent product. Material very comfortable. Lining perfect. Matt very helpful.
-
Comfortable Jeans
Jeans are very good sizing and comfortable with the added perks of high GSM Kevlar. Few minor complaints - little bit heavy when walking around but obviously heavy for the safety aspect if you come off in an accident when riding. Also the front pockets very tight but I imagine your not really supposed to put much in the front pockets when riding. All round very good Jeans!
-
Black kevlar lined motorcycle jeams
Good gear. Keeps you warm in cooler months and protected all the time. Matt checks the fit is correct. This is my 2nd pair. The first pair are 4 yrs old, little faded but still very good.
